Configuration for Distributors Using the CSP Model
Distributors using the CSP partner model will need to configure the parameters specified in the table below for the corresponding marketplace. To do this, complete the following steps:
Note: To obtain information about the configuration required for distributors using the Secure Application Model (CPV), click here.
- Log in to the CloudBlue Connect Distributor Portal.
- Go to Products and select the Microsoft SaaS product.
-
Click Configuration and filter the parameters by the marketplace scope to see the configuration parameters for the required marketplace.
- Assign the proper value to each parameter.
In the following table you can see a description of the parameters to be configured.
| ID:
|
partner_client_id_production
|
| Scope:
|
Marketplace
|
| Description:
|
Configure the required partner Client ID to be used in a production environment for the corresponding marketplace. This is also known as Application (client) ID. You can find this ID in the Overview section of the Azure app.
Note: This
Figure 1
|
|
| ID:
|
partner_client_id_test
|
| Scope:
|
Marketplace
|
| Description:
|
Configure the required partner Client ID to be used in a test environment for the corresponding marketplace. This is also known as Application (client) ID. You can find this ID in the Overview section of the Azure app (see Figure 1).
|
|
| ID:
|
partner_client_secret_production
|
| Scope:
|
Marketplace
|
| Description:
|
Client secret to be used in a production environment. The client secret must be generated in the Azure portal. To do this, go to the Azure Connect application and click Certificates & Secrets > New Client Secret.
Figure 2
|
|
| ID:
|
partner_client_secret_test
|
| Scope:
|
Marketplace
|
| Description:
|
Client secret to be used in a testing environment. The client secret must be generated in the Azure portal. To do this, go to the Azure Connect application and click Certificates & Secrets > New Client Secret). See Figure 2.
|
|
| ID:
|
partner_tenant_id_production
|
| Scope:
|
Marketplace
|
| Description:
|
Configure the required partner Tenant ID to be used in a production environment for the corresponding marketplace. You can find this ID in the Overview section of the Azure app.
Figure 3
|
|
| ID:
|
partner_tenant_id_test
|
| Scope:
|
Marketplace
|
| Description:
|
Configure the required partner Tenant ID to be used in a test environment for the corresponding marketplace. You can find this ID in the Overview section of the Azure app (see Figure 3).
|
|
| ID:
|
redirect_uri_production
|
| Scope:
|
Marketplace
|
| Description:
|
This parameter must be configured with the redirect URI to be used in a production environment. The URI will vary depending on the location where the processor was deployed (see the format below) and it must also be configured in the Azure Portal (App registrations > Azure Connector webapp > Authentication). This redirect URI will be used as a destination when returning authentication responses (tokens) after authenticating users.
Figure 4
|
| Value:
|
https://cspconsent.cloud.im/view_refresh_token
|
|
| ID:
|
redirect_uri_test |
| Scope:
|
Marketplace
|
| Description:
|
This parameter must be configured with the redirect URI to be used in a test environment. The URI will vary depending on the location where the processor was deployed (see the format below) and it must also be configured in Azure Portal (App registrations > Azure Connector webapp > Authentication). This redirect URI will be used as a destination when returning authentication responses (tokens) after authenticating users (see Figure 4).
|
| Value:
|
https://cspconsent.stg.cloud.im/view_refresh_token |
|
| ID:
|
currency
|
| Scope:
|
Marketplace
|
| Description:
|
Select the required currency for the corresponding marketplace. |
|